RAID Definition and Comments.

Udgivet d. 16 Nov. 2001 af: Bo Krüger Hansen

RAID levels 0, 1, and 5 are the most commonly available hardware RAID solutions for Windows NT systems, and NT includes them. Asterisks denote RAID levels available for NT only through hardware controllers or combinations of hardware and software.


DEFINITION Disk striping
COMMENTS Data is striped, or spread across, one or more drives in parallel.

RAID 0 is ideal for environments in which performance (read and write) is more important than fault tolerance or you need the maximum amount of available drive capacity in one volume. Drive parallelism increases throughput because all disks in the stripe set work together on every I/O operation. For greatest efficiency, all drives in the stripe set must be the same capacity. Because all drives are used in every operation, RAID 0 allows for single-threaded I/O only (i.e., one I/O operation at a time). Environments with many small simultaneous transactions (e.g., order entry systems) will not get the best possible throughput.


DEFINITION Disk mirroring
COMMENTS One drive is an exact copy of the other.

RAID 1 is useful for building a fault-tolerant system or data volume, providing excellent availability without sacrificing performance. (NT does not support a RAID set as the boot volume--this capability requires a hardware controller). However, you lose 50 percent of assigned disk capacity. Read performance is somewhat higher than write performance because NT reads data off the drive whose head is closest to the desired sector (called locality of reference); all write operations are made to both disks simultaneously.


DEFINITION Disk striping with parity
COMMENTS One physical drive is dedicated with parity to parity data (i.e., information the disk controller calculates to determine missing data on other disks); data is striped in blocks across multiple drives as in RAID 0.

RAID 3 offers the performance of RAID 0 with the fault tolerance of RAID 5, but with cautions. As with RAID 0, RAID 3 uses single-threaded I/O but with a standard 256KB data transfer block. Streaming data applications such as video-editing systems benefit simultaneously from disk parallelism, fault tolerance, and the large-block transfers. But database applications or others with many small transactions issued simultaneously might have problems.

RAID 2 is similar in concept to RAID 3 but writes in single bits to the drives in the stripe set rather than in blocks, thus requiring many drives for a volume (however, few--if any--implementations are available for NT).


DEFINITION Disk striping with parity
COMMENTS One physical drive is dedicated with parity to parity data. The striping algorithm differs from RAID 3 in that a data word is written to one drive, the next word to the next drive, and so on.

RAID 4 is similar to RAID 3 but uses a round-robin algorithm for writing data to the stripe set. Because RAID 4 has to generate parity data on one drive, write operations are single-threaded, but reads are multithreaded (i.e., are performed via multiple simultaneous I/O requests) because not all drives are involved in every transaction. RAID 4 is better for an environment requiring more discrete transactions per second. Both RAID 3 and 4 use the minimum number of drives to achieve fault tolerance.


DEFINITION Disk striping with parity
COMMENTS Parity data is distributed across with parity all drives in the volume. Normal data and parity data are written to drives in the stripe set in a round-robin algorithm, similar to RAID 4.

RAID 5 is multithreaded for both reads and writes because both normal data and parity data are distributed round-robin. This is one reason why RAID 5 offers better overall performance in server applications than either RAID 3 or 4. Random I/O benefits more from RAID 5 than does sequential I/O, and writes take a performance hit because of the parity calculations. RAID 5 is ideal for database applications.


DEFINITION Disk striping with parity
COMMENTS The parity information has with parity it's own parity data.

RAID 6 is essentially RAID 5 enhanced, such that two drives in the stripe set can fail because the distributed parity information has its own parity and is thus redundant.


DEFINITION Mirrored stripe sets
COMMENTS Also known as RAID 0+1 or RAID 6 stripe sets by some manufacturers.

You can build RAID 10 either directly through the RAID controller (depending on the controller) or by combining software mirroring and controller striping, or vice versa (called RAID 01).

Back to RAID main page.

Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'root'@'localhost' (using password: YES) in D:\\nimda\stats.php on line 16
Der kunne ikke forbindes