Home > Commands A-M > Commands Da-Dr

DEBUG


Description | Syntax | Parameters | Switches | Related | Notes | Examples | Errorlevels | Availability

A program testing and editing tool.

After Debug starts, type ? to display a list of debugging commands.


Syntax

DEBUG [[drive:][path]filename [testfile-parameters]]


Parameters
( [drive:][path]filename v1.0 Win95 NT3.5)
Specifies the file you want to test.
testfile-parameters (v1.0 Win95 NT3.5)
Specifies command-line information required by the file you want to test.

Switches

none


Related

none


Notes
Commands
    list commands ?
    assemble      A [address]
    compare       C range address
    dump          D range address
    enter         E address [list]

    fill          F range list
    go            G [=address] [addresses]
    hex           H value1 value2
    input         I port
    load          L [address] [drive] [firstsector] [number]

    move          M range address
    name          N [path] filename [arglist]
    output        O port byte
    proceed       P [=address] [number]
    quit          Q

    register      R [register]
    search        S range list
    trace         T [=address] [value]
    unassemble    U [range]
    write         W [address] [drive] [firstsector] [number]

    allocate expanded memory        XA [#pages]
    deallocate expanded memory      XD [handle]
    map expanded memory pages       XM [Lpage] [Ppage] [handle]
    display expanded memory status  XS

Examples

none.


Errorlevels

none.


Availability
External
DOS
v1.0 v1.05 v1.1 v1.11 v1.24 v1.25 v1.85 v2.0 v2.01 v2.05 v2.10 v2.11 v2.11R v2.12 v2.2 v2.25 v3.0 v3.20 v3.05 v3.1 v3.21 v3.25 v3.30 v3.3A v3.3R v3.3T v3.31 v3.40 v4.0 v4.01 v4.01A v5.0 v5.0A v5.00.02 v5.001A v5.01 v5.02 v6.0 v6.10 v6.2 v6.21 v6.22 v6.23 v7.00 v7.0R1 v7.10 v8.00
Windows
Win95 Win98 WinME
Windows NT
NT3.5 NT4 NT2000